<VV> LATE motor to early best way CONVERSION MOUNT

[tony underwood]

> On April 7, 2020 at 12:41 PM N2VZD TIM via VirtualVairs <virtualvairs at corvair.org> wrote:
> 
> 
> When putting a late (balancer  ) motor in a pre 64 I try to use a 64-65 FC motor mount. It worst best ,but hard to find.The 64 mount has worked fine on several I did , My alignment guy (former business partner) slots the rear mount with a power tool he has.  

If it's a 1960 model with a late engine, it takes a bit of modifying things.  I have an angle grinder that fixes that... not unlike your alignment guy and his power tools.  

And Smitty was right about the stacking-washers-behind-the-mount-bracket. It can change the rear toe-out.  Agreed, not a lot, but still...   I just notched the mount.  It didn't take much.  

Same thing with the '62 ragtop with a '65 engine w/balancer, didn't take much.  

tony..