<VV> Engine/ power train swap

[Smitty]

Sounds like you have a pretty good handle on it Greg. You didn’t mention that you will need Early front mounts.  I would strongly recommend that you use the stamped, shaped steel mount and rubber mount as a pair since they changed the location of the stud in the bottom of the rubber mount in 64.  Spacing a non harmonic plate to get fan belt clearance may give you unwanted toe out at the rear.  Yes the TV levers are the same internally.  Take a couple of good closeup pictures before you slide the little splined shaft out of the internal parts.  Put on a fresh O ring while you are there.