<VV> Piston Slap - Pin Offset

[Jay Maechtlen]

On 11/12/2019 7:29 PM, Charles Sadek wrote:
> No, .06 times 32 = 1.92 or 1.92/32 or almost 1/16th inch

aaaaahhhh - typo!

yes, 1/16"

>
>> see a couple of paragraphs on the subject on page 58 (revision III).  It
>> says there is a 0.055" - 0.065" pin offset on the stock Corvair piston.
> That's a fair bit, should be easily able to measure it with a caliper,
> and maybe see it by eye.
>
> (approx 1/6", right?)
>

-- 
Jay Maechtlen
SoCal
'61 2-dr modified w/fiberglass skin,
transverse 3.8 Buick V6 TH440T4 trans