<VV> Windshield Wiper Arm Removal on a Late Model

[FrankDuVal]

Not the tool that most everyoone sells now for taper fit arms with nuts 
to hold them on, you need some levering type like this:

https://www.amazon.com/Dorman-49023-HELP-Windshield-Wiper/dp/B002H9ABXS/ref=asc_df_B002H9ABXS/?tag=hyprod-20&linkCode=df0&hvadid=241973068692&hvpos=1o2&hvnetw=g&hvrand=2800712753568583579&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9008198&hvtargid=aud-801381245258:pla-569541965640&psc=1

The tool lays on the arm, with the hook pulling up opposite of the arm, 
counteracting the spring.

This tool does NOT touch the car, so it will not chip the paint like 
paint paddles, screwdrivers, Channellocks, etc.

Frank DuVal

On 8/21/2019 4:47 PM, Marc Sheridan via VirtualVairs wrote:
> The arm is spring loaded where it fastens, You need to release that tension
> and pull it off. They make a tool that simplifies the process but it can be
> done without it.
>
> On Wed, Aug 21, 2019 at 4:37 PM Paul Siano via VirtualVairs <
> virtualvairs at corvair.org> wrote:
>
>> Anybody have any tips?  Mine don't want to budge.
>>
>> Paul Siano