<VV> Coil Question

[Matt Nall]

I'd like to replace the junky AutoZone coil with a better quality one, my 66 Monza has the 110 engine with a FAST (formerly Crane Cams) XR700 ignition. That ignition system calls for a standard "points" coil. I noticed in Clark's catalog a Bosch coil that's expensive but my research indicates that it's a superior coil, epoxy filled instead of oil. Clark's catalog shows a picture of the Bosch coil as 0 221 119 027, which is their "0012 Blue" coil. However, specs online indicate it has a 3.4 ohms primary resistance, isn't that too high for a Corvair that has the resistor wire in place? I currently do have the resistor wire in place. Can I use the Bosch coil with the resistor wire, or would I need to remove it? Any advice would be appreciated, thanks guys 
Thanks everyone...Bill Hershkowitz
=================================================
Bill and others....
Yes it is with the resistor wire in place.     You want a Coil with primary resistance of 1.3 ohms or LESS.....and the late Bob Helt agrees!
Matt NallSea Ranch, near Charleston, Or.