<VV> Fans....!

[Hugo Miller]

### That's what I said - put a bigger pulley on it! ;)

-----Original Message----- 
From: kevin nash via VirtualVairs
Sent: Wednesday, November 15, 2017 4:07 AM
To: virtualvairs at corvair.org
Subject: Re:  Fans....!


I just wanted to point out that I designed my fan to hopefully solve the 
unique cooling challenges involved

with turbo corvairs, and as such, the expected output is considerably higher 
than most N/A corvairs, even the hopped up ones, really need. As such, the 
best way  to set this fan up for most street cars is to run it geared down, 
probably right around 1:25:1, and it will still have more cooling than the 
stock set-up, but use dramatically less power, because of the gearing and 
much improved efficiency. So, while the good idea

of a hydraulic drive does have some serious attractive features, especially 
if it had a nice feedback/temperature management system to keep the heads at 
a constant temperature irrespective of engine rpm and load, I'm pretty 
certain that most will find that the simple old stock mule drive is going

to work quite nicely with my fan. I cant wait to get this thing and my car 
and test it for real!!

Kevin Nash
63 Turbo, port injected EFI,

currently apart



_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


---
This email has been checked for viruses by AVG.
http://www.avg.com