<VV> LM Turn Signal Switch

[Ken Clark]

My 65 Corsa is doing something similar, I have to lightly push forward to make it and the brake light come on.  Left side only.  I'm thinking I'll have to take it apart to see what the problem is.  I think there's a contact problem.
Ken

On Jun 8, 2017 10:09 AM, edward szuch via VirtualVairs <virtualvairs at corvair.org> wrote:
My 66 Corsa just developed an issue with the left turn signal.  I have to
hold the lever down with light pressure past the normal detent to get it to
"blink" where the right side works fine.  Seems like it might be a
corrosion issue in the switch itself since everything else seems to work
fine.  All bulbs are good, tried a new flasher switch but still have the
problem.
I pulled the steering wheel and tried to spray some contact cleaner in the
switch area but it didn't help. I didn't see any obvious corrosion.
My next step will be to tear it all apart but I'm not sure if the switch
can be disassembled.
Any similar experiences and what was the fix?
Thanks very much.

Gary Szuch.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________