<VV> Vibration, not loose flywheel rivets

[Eric Lucas]

Jim,


I vote for flywheel. Things may have gone unexpectedly wrong there. You could check that without disassembly. Other possibilities are going to get more complicated.


Eric in Indiana


________________________________
From: VirtualVairs <virtualvairs-bounces at corvair.org> on behalf of James Cuneo via VirtualVairs <virtualvairs at corvair.org>
Sent: Thursday, April 27, 2017 12:46 PM
To: FrankDuVal; virtualvairs at corvair.org
Subject: Re: <VV> Vibration, not loose flywheel rivets

Bottom end has 20k miles on it. Crank was magnafluxed, balanced with Dale bolted flywheel.

Vibration just became noticeable within the last 500 miles.


________________________________
From: FrankDuVal <corvairduval at cox.net>
Sent: Wednesday, April 26, 2017 7:23 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> Vibration, not loose flywheel rivets

Was the flywheel just installed?

Frank DuVal


On 4/26/2017 1:16 PM, Matt Nall via VirtualVairs wrote:
>
> Hello,
>
> Has anyone ever experienced a vibration at idle with the trans in neutral and the clutch out, only to go away when you push the clutch in? Feels like something out of balance. Also noticeable at higher rpm. Pilot bearing? Thrust bearing? Something rotating in the trans?
>
> 65 140 4 speed with Dale bolted flywheel.
>
> Jim in Norcal
> ============================================
>
>
> 99%  loose rivets....  1 %  broken crankshaft...
>
>
> Matt Nall
> Charleston, Oregon


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________