<VV> Cleaning up oil stains

[Charles Cromwell]

That's an old army way. I use a short piece of a 2 by 4  

    On Wednesday, August 31, 2016 9:30 PM, S M via VirtualVairs <virtualvairs at corvair.org> wrote:
 

 That's how I always do it. 
yea, Vairily ... Shaun 

----- Original Message -----

From: "Paul Chapman via VirtualVairs" <virtualvairs at corvair.org> 
To: "virtualvairs" <virtualvairs at corvair.org> 
Sent: Wednesday, August 31, 2016 4:04:28 PM 
Subject: Re: <VV> Cleaning up oil stains 

The best method I've found is a trick I learned using the Auto Hobby Shop on the Naval Base in Charleston, S.C. You couldn't check out till all traces that you had been there were GONE. The method they had us use was put down the oil dry(kitty liter) work it around to get up the wet stuff,thin use a thin layer and grind it in with your feet (like doing the twist) after a couple of minutes of doing this ,sweep it up and the oil spot id gone. 


Paul Chapman 



> 

_______________________________________________ 
This message was sent by the VirtualVairs mailing list, all copyrights are the property 
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org 
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org 
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________ 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________