<VV> after Dual Master Brake Cylinder / poor braking
Matt Nall
patiomatt at aol.com
Thu Oct 27 14:43:03 EDT 2016
I recently installed a dual master brake cylinder in my 65 Monza
convertible and am not satisfied with the braking. The cylinder itself was
used, but appeared to be in good condition. I installed new lines and
wheel cylinders. The brake shoes seemed fine so I left them alone.
The brake pedal is not "mushy", it just takes a great deal of force to get
the car to slow/stop. No matter how hard I try I cannot lock the wheels.
Stopping quickly in an emergency situation is a practical impossibility.
I seem to remember reading that these symptoms might occur if the small
passage way between the two reservoirs is blocked.
Any suggestions?
=================================================================
1 Did it stop better BEFORE this work?
If it did... the BORE of your Dual MC is too large....
Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio
http://tinyurl.com/Matts-Tech-Pages
More information about the VirtualVairs
mailing list