<VV> LM diff yoke torque spec?

Joel McGregor joel at joelsplace.com
Thu Nov 17 16:12:34 EST 2016


https://www.boltdepot.com/fastener-information/bolts/US-Recommended-Torque.aspx

This chart lists 33 for a 3/8" grade 8.  I found some others that listed 35.  Nothing as high as 40-50 unless you are talking dry. (no oil at all)



Joel McGregor

________________________________
From: jvhroberts at aol.com [jvhroberts at aol.com]
Sent: Thursday, November 17, 2016 2:12 PM
To: Joel McGregor; chsadek at comcast.net; akinzelm at greatnortherncorp.com; virtualvairs at corvair.org
Subject: Re: <VV> LM diff yoke torque spec?

For a 3/8" Grade 8? Nah.

John Roberts


-----Original Message-----
From: Joel McGregor via VirtualVairs <virtualvairs at corvair.org>
To: BBRT <chsadek at comcast.net>; 'Kinzelman, Andy' <akinzelm at greatnortherncorp.com>; virtualvairs <virtualvairs at corvair.org>
Sent: Thu, Nov 17, 2016 2:44 pm
Subject: Re: <VV> LM diff yoke torque spec?

WAY too much for that little bolt...

Joel McGregor


________________________________________
From: VirtualVairs [virtualvairs-bounces at corvair.org<mailto:bounces at corvair.org>] on behalf of BBRT via VirtualVairs [virtualvairs at corvair.org<mailto:virtualvairs at corvair.org>]
Sent: Thursday, November 17, 2016 11:09 AM
To: 'Kinzelman, Andy'; virtualvairs at corvair.org<mailto:virtualvairs at corvair.org>
Subject: Re: <VV> LM diff yoke torque spec?

Diff Yoke Bolt to Diff 40-50 ft lb
Found In Clarks Catalog Tech Section and although I didn't look, it is in
the Factory Shop manual......

Chuck S

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org<mailto:virtualvairs-bounces at corvair.org?>] On Behalf Of
Kinzelman, Andy via VirtualVairs
Sent: Thursday, November 17, 2016 12:03 PM
To: virtualvairs at corvair.org<mailto:virtualvairs at corvair.org>
Subject: <VV> LM diff yoke torque spec?

Guys,
I have to replace the yoke in the diff; and assume there should be very
little torque on the retaining bolt. Anybody know offhand the torque spec
(if any)?
Thanks,
Andy K.
Wisconsin
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org<mailto:vv-help at corvair.org?>
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org<mailto:VirtualVairs at corvair.org>
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org<mailto:vv-help at corvair.org?>
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org<mailto:VirtualVairs at corvair.org>
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org<mailto:vv-help at corvair.org?>
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org<mailto:VirtualVairs at corvair.org>
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________


More information about the VirtualVairs mailing list