<VV> Want rolling chasis with engine removal?

[Ignacio Valdes]

How do I get the bell housing part separated from what I think is the
transmission? I took all the bolts off, pretty sure the bell housing is
free because when I descended it some with the jack the whole thing turned
so that the bolt holes are no longer aligned about 2 inches apart. However,
it descended incompletely at an angle so something is still holding it on
not a bell housing bolt. Do I just try to pry it apart or something else?

FYI: Holding the bell housing to what I think is the transmission? There
are 2 bottom long 9/16ths, 2 'mid' bolts, 2 bolts with washers to hold the
starter on and 2 on the top although 1 of mine was mysteriously missing.

I have been shooting a video of this and I will post it after I get the
engine free.

-- IV



On Sat, Jul 9, 2016 at 2:13 PM, Ignacio Valdes <ivaldes at hal-pc.org> wrote:

> Many thanks, so how many bolts to take just the engine out? Approximate
> location of the bolts?
>
> On Sat, Jul 9, 2016 at 12:31 PM, Harry Yarnell (Verizon) <
> harryyarnell at verizon.net> wrote:
>
>> Engine only? Then nothing need doing.
>> Powertrain? EM, use a piece of pipe between the axles.
>> LM; tie the lower struts together.
>>
>>
>>
>> -----Original Message-----
>> From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
>> Ignacio Valdes via VirtualVairs
>> Sent: Saturday, July 09, 2016 1:02 PM
>> To: Virtual Vairs
>> Subject: <VV> Want rolling chasis with engine removal?
>>
>> Hi, I want my chasis to roll but take the engine out. What should I take
>> out
>> and what do I leave in?
>>
>> -- IV
>>  _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights are
>> the property of the writer, please attribute properly. For help,
>> mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
>> America, http://www.corvair.org/ Post messages to:
>> VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> Archives: http://www.vv.corvair.org/archive.htm
>>  _______________________________________________
>>
>>
>