<VV> Special Russ Davis harmonic balancer p

[RoboMan91324 at aol.com]

Absolutely true.  You must turn both bolts equally.  Do not trust  the 
torque to judge the equality between the bolts because there may be some  crap 
in one of the bolt holes that causes more resistance.  Also, tighten  both 
bolts moderately and tap the balancer to dislodge it.  If it doesn't  come 
loose, tighten a little more.  If it seems that you are tightening too  much, 
don't force it.
 
Doc
~~~~~~~~~~~~~~~~~~~~~~
 
In a message dated 8/21/2016 10:32:57 P.M. Pacific Daylight Time,  
virtualvairs-request at corvair.org writes:

Message:  7
Date: Sun, 21 Aug 2016 23:32:43 -0600 (MDT)
From: S M  <shaun_mcgarvey at shaw.ca>
To: Frank DuVal  <corvairduval at cox.net>
Cc: Cliff Tibbitts via VirtualVairs  <virtualvairs at corvair.org>
Subject: Re: <VV> Special Russ Davis  harmonic balancer puller
Message-ID:  <2145134301.59164787.1471843963560.JavaMail.root at shaw.ca>
Content-Type:  text/plain; charset=utf-8

tightening the bolts evenly goes a long way  to helping with this. Chances 
are only one bolt was used...