<VV> Wire Wheels

[Dusty Steinberg]

This picture of the jacking instructions should answer the questions.. 


-----Original Message-----
>From: shortle <shortle556 at earthlink.net>
>Sent: Sep 16, 2015 7:08 PM
>To: Dusty Steinberg <noahsarkinc at earthlink.net>, Patrick Murphy <litetrix at gmail.com>, "virtualvairs at corvair.org" <virtualvairs at corvair.org>
>Subject: Re: <VV> Wire Wheels
>
>This is very interesting reading and it sounds like you have done your homework Dusty. I hope this is what Patrick was asking about. I wonder how many of these options were installed on wagons/AC cars. I am assuming they were the same kit for both of these cars?
>Timothy Shortle in Durango Colorado 81301
>
>
>-----Original Message-----
>>From: Dusty Steinberg via VirtualVairs <virtualvairs at corvair.org>
>>Sent: Sep 16, 2015 4:51 PM
>>To: Patrick Murphy <litetrix at gmail.com>, "virtualvairs at corvair.org" <virtualvairs at corvair.org>
>>Subject: Re: <VV> Wire Wheels
>>
>>I don't have pictures, of this, however, if you check the assembly manual for 1962, 1963, or 1964, there is a drawing of the mounting.  There was a plate welded into the rear vertical wall of the trunk, and the plate is the same as what was used in the 1960 Corvairs.  A large J hook was inserted into the recess on the plate, and then the wire wheel retainer went over the bolt section of the J hook, and then a large wing nut secured the whole assembly.  There was a separate jacking instruction sheet for this option, and it has never been reproduced.  Jack, wrench, and lead hammer reside in the front left corner of the trunk, under the spring, just like in all the rest of the cars.  
>>Paul in CT
>>
>>PS.. I have an original air conditioned car with the Kelsey Hayes wire wheel option that I am presently restoring. 
>>
>>
>>-----Original Message-----
>>>From: Patrick Murphy via VirtualVairs <virtualvairs at corvair.org>
>>>Sent: Sep 16, 2015 12:34 PM
>>>To: "virtualvairs at corvair.org" <virtualvairs at corvair.org>
>>>Subject: <VV> Wire Wheels
>>>
>>>Anybody have photos of how wheel spare mounts in trunk, not engine
>>>compartment, of a wagon. And where did jack and handle mount.
>>> _______________________________________________
>>>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>>>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>>>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>>>Post messages to: VirtualVairs at corvair.org
>>>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>>>Archives: http://www.vv.corvair.org/archive.htm
>>> _______________________________________________
>>
>> _______________________________________________
>>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>>Post messages to: VirtualVairs at corvair.org
>>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>>Archives: http://www.vv.corvair.org/archive.htm
>> _______________________________________________
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MVC-015L.JPG
Type: image/pjpeg
Size: 44324 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20150918/9588caa2/attachment.bin>