<VV> fuel sloshing

[Bryan Blackwell]

> On May 24, 2015, at 7:41 PM, Jay Maechtlen <jaysplace at laserpubs.com> wrote:
> 
> On 5/24/2015 3:56 PM, Bryan Blackwell wrote:
>> A solution that worked pretty well for me was a removable baffle for the filler neck.  It looked like a short dipstick - about a foot long.  The outer end was bent so you couldn't push it down the neck.
>> 
>> --Bryan
>> 
>>> On May 22, 2015, at 11:52 PM, Jay Maechtlen via VirtualVairs <virtualvairs at corvair.org> wrote:
>>> 
>>> The hose between the tank and filler neck is ok, the gas does come out the neck and around the cap.
>>> There are streaks down the primer on the side to tell the story,
> aha - so the baffle would ride way down in the fill tube near the tank itself?
> Sound like a very good idea.

No, actually it was up near the top, but that foot - or maybe 18" - was sufficient.  I took it out to fill up.

--Bryan