<VV> gear lube leveling problem

[MarK Durham]

The two home on my 62 4 speed do not appear to be the same height either. I
just filled the lower one first, the filled the upper until fluid came out
the lower and stopped.
Mark Durham
62 Coupe 4 speed
On Jul 23, 2015 9:26 AM, "BobHelt--- via VirtualVairs" <
virtualvairs at corvair.org> wrote:

> One of our Corvair owners with a 1968 4-speed has discovered that filling
> the differential with fluid up to the bottom of the filler hole and letting
> it  set for a while to equalize fluid levels results in the transmission
> level being  below the filler hole there. Similarly filling the trans to
> just
> below the  filler hole overfills the diff.
>
> Has anybody else ever encountered this condition? Could it be a factory
> misalignment of the two filler holes?
>
> Bob Helt
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>