<VV> Re-hang a door alone? ~ new tools

[Charlie]

Or to invent a new tool!

Charlie


-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
Ignacio Valdes via VirtualVairs
Sent: Monday, February 23, 2015 6:37 AM
To: Charlie
Cc: Virtual Vairs
Subject: Re: <VV> Re-hang a door alone?

Every job is a chance to buy a new tool :-)

On Sun, Feb 22, 2015 at 10:38 PM, Charlie <chaz at properproper.com> wrote:

> No, I haven't used any of those tools...
>
> But, now that the door is attached, if not well aligned, the door can 
> be supported by anything that won't scratch or dent it while you try 
> different adjustments to get it to close correctly?
>
> It might take a few tries, but the hard part was getting it ON the car 
> in the first place, right?
>
> Buying an alignment bar might take a while, and seems to be a bit of 
> overkill, unless you plan on doing a lot of these?
>
> Good luck with that,
> Charlie
>
>
> -----Original Message-----
> From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf 
> Of Ignacio Valdes via VirtualVairs
> Sent: Sunday, February 22, 2015 8:31 PM
> To: Virtual Vairs
> Subject: <VV> Re-hang a door alone?
>
> Hi, My 1964 coupe passenger door opens and closes with difficulty 
> probably because I re-hung it by myself and didn't do a very good job. 
> Is there a way to re-hang it alone so that it works better? I had to 
> hold it and tighten at the same time obviously not very well.
>
> Are these any good?
>
> Steck Manufacturing 21845 E-Z Store Door Alignment Bar
>
>
> http://www.amazon.com/Steck-Manufacturing-21845-Store-Alignment/dp/B00
> 0JFL8S
>
> 4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1424662804&sr=1-1&keywords=door+
> alignm
> ent+tool
>
> -- IV
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org This list sponsored by the Corvair Society 
> of America, http://www.corvair.org/ Post messages to:
> VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
>
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________