<VV> Now my question - II

[frankcb at aol.com]

Timothy, it was Brylcreem  that used the slogan:  "A little dab will do you, you look so debonair".  Strangely enough I  STILL use the stuff on MY hair.  Maybe that's why I still have some left.  
        Regarding plug threads, I use only enough of the anti-seize (not Brylcreem) to cover SOME (not ALL) of the threads.
    Frank "old fashioned" Burkhard
    Boonton, NJ
 
 
-----Original Message-----
From: shortle via VirtualVairs <virtualvairs at corvair.org>
To: MarK Durham <62vair at gmail.com>; judynrandy <judynrandy at comcast.net>
Cc: virtualvairs <virtualvairs at corvair.org>
Sent: Tue, Feb 10, 2015 10:47 am
Subject: Re: <VV> Now my question - II


I use a VERY LIGHT amount of anti seize on my plug threads. I also use it on anything that screws into aluminum. Like an old hair tonic commercial, "a dab will do you".
Timothy Shortle in Durango Colorado 81301


-----Original Message-----
>From: MarK Durham via VirtualVairs <virtualvairs at corvair.org>
>Sent: Feb 10, 2015 8:09 AM
>To: judynrandy at comcast.net
>Cc: virtualvairs at corvair.org
>Subject: Re: <VV> Now my question - II
>
>Yes that does sound better! There was a submitter over on the Corvair
>Center Forum who sent pics of his plugs and antiseize was oozing out
>everywhere and had been shorting the plugs. So I had visions of that when
>you said "gobs" . :):)
>
>I use light grease on my taps to catch the debris.
> Mark Durham
>Hauser, Idaho
>62 Monza coupe Red/Red 4 speed
>
>On Mon, Feb 9, 2015 at 9:31 PM, Randy Hook via VirtualVairs <
>virtualvairs at corvair.org> wrote:
>
>>
>> Oooops.  Maybe "gobs" was a poor choice of words.  I guess "liberal
>> amount" would have been better.  (Within reason, of course.)  As far as the
>> garbage produced from running the tap thru the threads, not to worry.  That
>> problem is solved thusly:  my spark plug tap has 4 recessed areas along
>> with 4 sets of cutting teeth.  What I do is spray the tap with WD-40 first,
>>  getting it nice 'n wet prior to installation.  Any debris that is then
>> dislodged sticks rather nicely in those 4 previously mentioned recesses.
>> Works pretty slick.
>>
>> Randy (Cap'n) Hook
>> '60 700 4dr '64' 110/4spd
>> '63 '500' ragtop 110'pg
>> '65 Monza 4dr 84/pg
>>  _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights are
>> the property
>> of the writer, please attribute properly. For help, mailto:
>> vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>>  _______________________________________________
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________