<VV> Ignition weirdness

[MarK Durham]

Here is a pic of my install. Mark Durham Hauser Idaho 62 Coupe Red/Red
On Sep 22, 2014 3:07 PM, "Jeff Wilson via VirtualVairs" <
virtualvairs at corvair.org> wrote:

> I'm having all kinds of grimlins with my ignition system.
>
> Just put in new plugs and plug wires, and a new coil.
>
> It (65 95HP) still idles pretty crappy.
>
> Coil says on its side use ONLY with resistor!
>
> I've checked th voltage on the + terminal, it shows 12.5
> with engine off and circa 11 with the engine running.
> Is this about right? Seems high to me. Is the black and yellow
> wire to the + terminal not supposed to be a 'resistance wire'?
>
> Dwell meter shows 30 degrees dead on, but I feel like it ran
> better at about 20. Can you have too MUCH dwell (points too
> close)?
>
> CJ Wilson
>
> PS felling like bagging it and going Pertronics, but would like to
> get the points system right just for now.
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20140922_182835228.jpg
Type: image/jpeg
Size: 1174992 bytes
Desc: not available
URL: <http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20140922/f0b9c195/attachment.jpg>