<VV> Loose dome light plunger switches?
Jim Becker
jim.becker at verizon.net
Tue Mar 11 21:59:18 EDT 2014
No, to work reliably, they need to be snug in the hole. After all, the
switch needs a good ground to the car body. You might try adding a flat
washer to take up a little slack.
Jim Becker
-----Original Message-----
From: Ignacio Valdes
Sent: Tuesday, March 11, 2014 8:39 PM
To: virtualvairs at corvair.org
Subject: Loose dome light plunger switches?
Hi, My dome light stayed on so I changed out the door plunger switches with
Clark's C2191. They thread okay into the old spot but the thread ends near
the nut unlike the originals that seem to have one more thread turn on
them. The new ones sit kind of loose. Is this the way they are supposed to
be? This is on a 1964 Coupe.
-- IV
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list