<VV> EMPI camber compensator pics

[Wade Lanning]

I saw these installed on a 64 Corvair years ago and as I recall the center simply rested against the differential with no bolts or clamps to secure it. The front EMPI compensator rested against the bottom of the front crossmember, but I don't recall if it was clamped in the center. 

Wade 


Message: 1 
Date: Tue, 22 Jul 2014 07:31:19 -0700 
From: MarK Durham <62vair at gmail.com> 
To: wrsssatty at aol.com 
Cc: virtualvairs at corvair.org 
Subject: Re: <VV> EMPI camber compensator pics 
Message-ID: 
<CAEEoEu5yxqP3vZkB1=WPJhKfkcsuJxqttK7rJNm_tARBNNXrSQ at mail.gmail.com> 
Content-Type: text/plain; charset=UTF-8 

Bill, great pictures. It looks like it bolts to the a arms at the shock 
mount holes, but what does it bolt to in the center? 

Mark Durham Hauser Idaho 
62 2Door Coupe 4speed Red/Red 
On Jul 22, 2014 5:19 AM, "wrsssatty--- via VirtualVairs" < 
virtualvairs at corvair.org> wrote: 

> Some folks have been clamoring for photos of my NOS, uninstalled EMPI 
> camber compensator. I hope this works after scrubbing, etc. by the Virtual 
> Vairs powers that be! 
> 
> 
> ~Bill Stanley 
> -------------- next part -------------- 
> A non-text attachment was scrubbed... 
> Name: EMPIlabel.jpg 
> Type: image/jpeg 
> Size: 227968 bytes 
> Desc: not available 
> URL: < 
> http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20140721/03903299/attachment.jpg 
> > 
> -------------- next part -------------- 
> A non-text attachment was scrubbed... 
> Name: EMPIcamberCompensator.jpg 
> Type: image/jpeg 
> Size: 128467 bytes 
> Desc: not available 
> URL: < 
> http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20140721/03903299/attachment-0001.jpg 
> > 
> _______________________________________________ 
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property 
> of the writer, please attribute properly. For help, mailto: 
> vv-help at corvair.org 
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/ 
> Post messages to: VirtualVairs at corvair.org 
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________ 
> 


------------------------------ 

Message: 2 
Date: Tue, 22 Jul 2014 11:53:43 -0400 
From: Cliff Tibbitts <cliff at tibweb.com> 
To: N2VZD at aol.com, virtualvairs at corvair.org 
Subject: <VV> convention and corvairs 
Message-ID: 
<CAOJt_24mWj58OxJQ2ByG6PAyNM17oMtSD6QsSFdX-vxtp_dQTg at mail.gmail.com> 
Content-Type: text/plain; charset=UTF-8 

Tim, 

I just saw him tying to load a dilapidated rust bucket on a trailer. You 
better close up shop now and head for the hills. 

KIDDING, 

We just got in last night. Drove our 66 all the way from Lexington, KY. 
Joined up with Dave and Ina Keillor from Rochester, MN and made the trip 
without incident. Miles and miles of cornfields finally gave way to some 
of the most impressive scenery I have ever seen. The week is just getting 
into full swing. 

Matt Nall will likely be posting links from time to time with pictures. We 
took plenty on the drive out, just need to get around to posting them 
somewhere. 

-- 

Cliff Tibbitts 
cliff at tibweb.com 


------------------------------ 

Subject: Digest Footer 

_______________________________________________ 
This message was sent by the VirtualVairs mailing list, all copyrights are the property 
of the writer, please attribute properly. For help, mail to: vv-help at corvair.org 
This list sponsored by the Corvair Society of America, http://www.corvair.org/ 
VirtualVairs at corvair.org 
http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 

------------------------------ 

End of VirtualVairs Digest, Vol 114, Issue 41 
*********************************************