<VV> '63 HD spring spec

[jwcorvair at aol.com]

Hi,

Would it be possible for you to post pictures of the parts on VV.  I think that as time passes we are loosing information about what constitutes original parts from our Vairs. What would be useful is if we had a repository on the CORSA or some other site for information about original parts for our cars. I know that we have a site devoted to stock cars, but I'm not certain that site is universally viewed.

Regardless, I think that it is important and useful if we can record all that we know about Corvair features and components.

Regards,
Joe White (62 four door, 64 Spyder project, 66 Porvair)

 

 

 

-----Original Message-----
From: Dusty Steinberg via VirtualVairs <virtualvairs at corvair.org>
To: Bryan Blackwell <bryan at skiblack.com>; Virtual Vairs <virtualvairs at corvair.org>
Sent: Thu, Dec 25, 2014 9:07 pm
Subject: Re: <VV> '63 HD spring spec


I don't have a pair of the HD springs, but I did have them on a 1963 Spyder 
convertible that I once owned.  If I remember correctly, they were a heavier 
wire, than the standard springs.  The one thing that I do recall vividly, was 
that the HD suspension package included rear rebound straps that limited the 
amount of travel that the rear lower control arm could drop.  This s clearly 
shown how it was accomplished in the 1962 Factory Assembly manual.  I do have a 
pair of rear lower control arms with the brackets welded to them, and the 
rebound strap steel plates that mounted under the rubber bumper, along with the 
small steel plates that were used to hold the two halves of the rebound strap 
where it went through the lower control arm bracket.  I even have a pair of NOS 
rebound straps.  I have kept all these parts together for many years, and was 
planning on installing them on a 1962 or 1963 Spyder if I ever bought one, but 
so far, I haven't come across a car to my liking.  I don
 't want to sell them at this time.  I have been talking with a machine shop 
about reproducing the parts.  Nothing set in stone quite yet. 
Paul in CT


-----Original Message-----
>From: Bryan Blackwell via VirtualVairs <virtualvairs at corvair.org>
>Sent: Dec 25, 2014 10:32 PM
>To: Virtual Vairs <virtualvairs at corvair.org>
>Subject: <VV> '63 HD spring spec
>
>Hi folks,
>
>Hope everyone had a Merry Christmas!
>
>There have been several threads in the past that included discussion of the 
'62/'63 HD suspension.  I know it included a front sway bar, but I don't know 
what the difference is between normal and HD springs.  If anyone can supply that 
info, I'd appreciate it.  If by chance you have an extra set of these springs 
you'd like to sell, please let me know where you are and what you'd like to get 
for them.
>
>--Bryan
>
>Bryan Blackwell | Springfield, Va. | bryan at skiblack.com | http://autoxer.skiblack.com/  

>  Corvairs: '62 700 Wagon, '64 Greenbrier, '65 Corsa, '66 Corsa
>  '69 Road Runner, '99 Neon R/T, '00 Miata SE, '09 Ford F-150
>"Why do something if you're not going to obsess about it?"
>
>
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________