<VV> The great puzzle

[jvhroberts at aol.com]

Where have you connected the PCV line?
 

 

John Roberts
 

 

-----Original Message-----
From: Robert Paul via VirtualVairs <virtualvairs at corvair.org>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Sun, Nov 30, 2014 9:59 pm
Subject: Re: <VV> The great puzzle


Please put your thinking caps on for this one. I have just had a 110 engine 
rebuilt ( twice). It burns oil on one side. I know because I set up a dual 
muffler   It burns oil at high vacume. ( not at full speed). Only at idle. So 
much so that after you park and let the engine sit for a few minutes there is a 
pool of oil in the driver side cylinders. Ps. There is a pool of oil under the 
carb on the driver side.   The Pistons are new from Clarks.  The cylinders are 
new.  And match on size. We checked that.  The heads have been re done ( twice). 
What are we missing?  Ps again The crossover tube was disconnected along time 
ago.  Let's see we specked the Pistons for micro cracks. And ran the engine with 
a 1/2 cut valve cover to make sure there wasn't flooding I. The driver side.   
What have I missed. Any good ideas would be great. Thanks
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________