<VV> 1967 Monza Fuel Tank Removal ~ Easier than I thought, except ...

[Ron Hinz]

Is solder strong enough for the task or should brazing be considered?

RonH

-----Original Message----- 
From: Frank DuVal via VirtualVairs
Sent: Monday, August 4, 2014 9:26 PM
To: virtualvairs at corvair.org
Subject: Re:  1967 Monza Fuel Tank Removal ~ Easier than I thought, except 
...

Oh, I know!

I have resoldered many of those vent nipples back into their hole...

Frank DuVal


On 8/4/2014 10:11 PM, shortle via VirtualVairs wrote:
> I am assuming the gas filler neck is fine and it is just the hoses that 
> are rotted away? And be careful you don't break the small pipe that comes 
> out of the top of the tank that hooks up to the filler pipe hose 
> (overflow?).
> That would ruin your day. Ask me how I know this (if you dare).
> Timothy Shortle in Durango Colorado 81301

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________