<VV> accelertor return spring?

[Michael Kovacs]

The other end attaches to a metal tab welded to the sheet metal shroud toward the front of the car. The tab has a small hole in it.


From: Matt Nall <patiomatt at aol.com>
To: virtualvairs at corvair.org 
Sent: Sunday, July 28, 2013 8:20 PM
Subject: Re: <VV> accelertor return spring?





Hi - Can someone verify where and how does the accelerator return spring attach 
to on the linkage on a late model (1966) 110HP engine. I can't seem to find a 
picture of this in the GM assembly manual. 

Need to confirm where and how it attaches to the linkage. A photo would be 
welcomed too. Thanks! 

Rich 

===================================================


Thru the hole in the swivel pin that connects the throttle rod to the cross shaft.


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio

http://tinyurl.com/Matts-Tech-Pages











_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________