<VV> FC front suspension

[Joel Rushworth]

I was getting concerned that the conversation was generating conflicting
information that might lead the OP down the wrong path and wanted to make an
unequivocal statement.

No offence was intended, I just wanted to make sure the facts were clear as
to what application would actually work on the Corvair FC.

Regards,
Joel

-----Original Message-----
From: hank kaczmarek [mailto:kaczmarek at charter.net] 
Sent: Tuesday, February 26, 2013 7:12 PM
To: gwydionjhr at outlook.com; 'Robert Brought'; virtualvairs at corvair.org;
'Vairtec Corporation'
Subject: Re: <VV> FC front suspension

Joel--I never said you were wrong.  All I said was confirming Bob's
statement that Chevy made Style Code 1000 and 1200 cars until 1964.

I don't know the dimensions of the spindles, and really don't care.

Lighten up, OK?

Hank


-----Original Message-----
From: Joel Rushworth
Sent: Tuesday, February 26, 2013 5:53 PM
To: 'hank kaczmarek' ; 'Robert Brought' ; virtualvairs at corvair.org ;
'Vairtec Corporation'
Subject: RE:  FC front suspension

I'm sorry, but Bob is wrong, or rather the original source material is
wrong.  Bob brought up the 58-64 stuff when I started investigating this
before I did my install.

The Tri5 spindles are approx. 9" top to bottom if my memory serves, the
58-64 are 11" and will definitely not work on the FC.

I know I'm right, I HAVE THIS SETUP WORKING ON MY RAMPSIDE.

Regards,
Joel

_______________________________________________