<VV> Wheel Cylinders Survey

[Frank DuVal]

I always use the brake fluid (that I'm going to use, typically now DOT 
5) as the lube for the honing process.

  Yes, I've done many a cylinder with 400 or 600 wet or dry sandpaper. 
Have to on cylinders too small for my hone.

Frank DuVal

On 12/25/2013 7:21 AM, Rick Norris wrote:
> Again, back in the day when I couldn't afford nice tools I had a cheap wheel
> cylinder hone that was actually made to use sand paper!
> I always used wet or dry paper with WD40 as a lube. It worked as long as you
> cleaned the cylinder well.
>
> Rick Norris