<VV> FC 4 carb aircleaner ideas?

[Paul Fox]

I was looking at K&N's list. It looked like there are some filters that should fit. But it would be close and you'd have to grind the lugs off the tops of the carbs. Then there's the high cost of these filters too. Something like $36 each.
Paul Fox



On Thursday, December 12, 2013 7:08 PM, Bryan Blackwell <bryan at skiblack.com> wrote:
  
Hi Tim,

I got a photo of a setup someone made to use individual filters on a GB, you can see it on this page on my site:

http://autoxer.skiblack.com/airfilter.html

The issue, BTW, with the stock filters is that the air doesn't like the sharp turn at the carb inlet.  You can see some solutions to that problem for the cars on that page as well.

--Bryan


On Dec 12, 2013, at 12:40 PM, N2VZD at aol.com wrote:

> 
> Any innovative 4 carb air cleaners that will fit under the FC motor  cover?
> I could use pictures to help me come up with something this winter.
> I have the plans from the tech guide etc , looking for other ideas  first.
> The 4 chrome bonnets I have are too tall , no matter what I do, plus I  
> would like better  filtering.
> Thanks , and happy holidays , Tim Colson 
> 63 Rampy among other Corvairs here.
>  _n2vzd at aol.com_ (mailto:n2vzd at aol.com)  
> 
> http://www.cnycorvair.com/Little_Corvair_Shop.php

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________