<VV> Helpful method to rmove A pillar trim on LM cvt

[hallgrenn at aol.com]

John,

After you've removed the screws start gently rocking (top to bottom) it back off of the door side pinch weld.  A little silicone spray from the top down (unless you've got all new headliner and carpet) will help.  The bottom sometime sticks too because of rust, but mainly you'll be dealing with the pinch weld (which may also be rusty--especially on a convertible).

Bob Hall
Group Corvair
Corvanatics
CORSA
'65 Corsa
'68 Monza
'64 Greenbrier


-----Original Message-----
From: John Gull <vairdude at gmail.com>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Mon, Aug 19, 2013 6:56 am
Subject: <VV> Helpful method to rmove A pillar trim on LM  cvt


Anyone have a good method to remove the plastic trim on the A pillar of a
late model Convert without breaking? Many thanks John Gull in Asheville NC

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________