<VV> [SCG] Engine Size Emblem Removal on Rear Deck Lid

[Dennis Pleau]

Fishing line or even better dental floss works very well to remove glued on
emblems.  I'm not sure how it would remove the emblems that are held on by
pins.

dp

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of FrankCB at aol.com
Sent: Friday, April 12, 2013 7:50 PM
To: airvair at earthlink.net; eamsquared at comcast.net; virtualvairs at corvair.org;
scg-list at tiger.skiblack.com
Subject: Re: <VV> [SCG] Engine Size Emblem Removal on Rear Deck Lid

I've read where people have successfully used nylon fishing line to remove
these without harming the paint.  I've never done it, but it makes sense to
me.
Frank Burkhard
Boonton, NJ
 
 
In a message dated 4/12/2013 8:05:45 P.M. Eastern Daylight Time,
airvair at earthlink.net writes:

By  carefully prying it up with a small flat screw driver or other flat
tool.  You gently work your way around the emblem and work it up a little at
a  time. And use a shop rag under it to protect the paint.

-Mark  

_____________________________________