<VV> Ignition

[Lon Anderson]

As for keys, 60-66 ignition are all the same.... then the "letter" keys started in '67 and are different each year (on a rotating 4 year schedule) after that...
See if there is a letter stamped into the neck, like "A" or "D"....
Later,
Lonzo


-----Original Message-----
From: J R Read <hmlinc at sbcglobal.net>
To: Jason Cesana <jacesana1 at verizon.net>; virtualvairs <virtualvairs at corvair.org>
Sent: Sun, Apr 7, 2013 9:23 pm
Subject: Re: <VV> Ignition


Well, either I've not seen them all or your switch has enough ware that the 
LM one works.  OR - both of these are possible?
Later, JR


----- Original Message ----- 
From: "Jason Cesana" <jacesana1 at verizon.net>
To: "'J R Read'" <hmlinc at sbcglobal.net>; <virtualvairs at corvair.org>
Sent: Sunday, April 07, 2013 8:19 PM
Subject: RE: <VV> Ignition


> Interesting. Perhaps my 60 had a late model ignition in it as I had one 
> for
> that car. Thanks JR.
> Jason
>
> -----Original Message-----
> From: J R Read [mailto:hmlinc at sbcglobal.net]
> Sent: Sunday, April 07, 2013 9:16 PM
> To: Jason Cesana; virtualvairs at corvair.org
> Subject: Re: <VV> Ignition
>
> The one's I've seen as you describe only fit the LM ignition switch.
> Later, JR
>
>
> ----- Original Message ----- 
> From: "Jason Cesana" <jacesana1 at verizon.net>
> To: <virtualvairs at corvair.org>
> Sent: Sunday, April 07, 2013 8:03 PM
> Subject: <VV> Ignition
>
>
>>
>>
>> Hey folks. I recently picked up an uncut key with the word CORVAIR
>> inscribed
>> on it. I was going to have it cut to match my latest Corvair a 64 Monza. 
>> I
>> checked the key before having it cut and it does not slide into the
>> ignition. I checked the key to the one that works and they seem to match.
>> Is
>> the late models ignition similar but not exact to the earlies? This might
>> help explain this. Thanks
>>
>>
>>
>> Jason Cesana
>>
>