<VV> Rods

Sat Apr 6 16:42:51 EDT 2013

Guys - Let's get this right. All Corvair rods are the same length and 
the same length centerline/pin to centerline/bearing.  The  ONLY 
difference in years is the crossection of the rod neck and sometimes 
minor variations in the castings themselves.

The rods are the same - the deck height of the pistons are different.

Lon Wall
www.corvairunderground.com

On 4/5/2013 4:51 PM, Matt Nall wrote:
>
>
> In looking at the Clark's catalog for rods for a LM engine, I noticed that they
> list lightened/balanced rods and list one number for 64-69 all and the same
> number for 62-83 turbo. I know there is a difference in length between EM and LM
> rods.  I thought that 62-63 stroke was 2.60 and 64-69 was 2.9.  What gives?  How
> can the rods be the same?
>
> =============================================
>
>
>   See if I get this right!! ggg
>
>
>   Rods are the same length....  piston pin  height is different!
>
>
> Matt Nall
> Charleston, Oregon
> http://tinyurl.com/The-Corvair-Patio
>
> http://tinyurl.com/Matts-Tech-Pages
>
>
>
>
>
>
>
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>   _______________________________________________
>
>