<VV> Saginaw 4-spd in Greenbrier

[Eric Lucas]

Matt,
 
Sorry for the lack of clarity. I was talking specifically about the 66 "heavier" 4-spd. My plans are to go bigger on the engine and wanting a stronger gearbox. I am getting good feedback on the proposition so keep the advice (both + and -) coming!
 
I am still looking for a resto candidate 64-65 4-speed GB (or late 63 with newer shifter).

Eric in Indiana
 

> To: virtualvairs at corvair.org
> From: patiomatt at aol.com
> Date: Tue, 27 Nov 2012 15:09:22 -0500
> Subject: Re: <VV> Saginaw 4-spd in Greenbrier
> 
> 
> 
> 
> I am considering this for my resto-mod project. Would appreciate any comments 
> about if this is possible and/or worthwhile. I know the front crossmember is 
> unique on the FC 4-spd but not sure if the Saginaw is useable.
> Thanks in advance.
> Eric in Indiana 
> 
> ===================================================
> 
> 
> ALL 4 speeds used in ALL Corvairs are Saginaws!
> 
> 
> How many bolts for mounting to the Diff. does yours have?
> 
> 
> Matt Nall
> Charleston, Oregon
> http://tinyurl.com/The-Corvair-Patio
> 
> http://tinyurl.com/Matts-Tech-Pages
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________