<VV> A/C Production/AC heads/gaskets

[Frank DuVal]

I don't know the application, but I have a GM envelope with copper head 
gaskets in it. I shall have to unearth the envelope and see if they were 
actually jug spacers (block side). Maybe even see if the part number is 
still readable.

Frank DuVal

On 5/30/2012 11:26 PM, shortle wrote:
> Hi Bob, I don't think the spacers were "copper" but I do believe they were fatter (to lower the CR).
> Timothy Shortle in Durango Colorado 81301
>
>
> -----Original Message-----
>> From: HallGrenn at aol.com
>> Sent: May 30, 2012 6:14 PM
>> To: HallGrenn at aol.com, BobHelt at aol.com, corvairduval at cox.net, virtualvairs at corvair.org
>> Subject: Re:<VV>  A/C Production/AC heads/gaskets
>>
>> And it has the riveted 24 degree timing tab.
>>
>> Bob
>>
>>
>> In a message dated 5/30/2012 8:13:09 P.M. Eastern Daylight Time,
>> HallGrenn at aol.com writes:
>>
>> The  stock '66 AC engine I own had the 95 HP heads and no copper  spacers
>> under the cylinders as Bob  said.
>>