<VV> WANTED: Engine Oil Slinger

[Michael Kovacs]

I believe I just had one in my hand yesterday, I'll check tomorrow. Clark's 
CU1133 is out of stock. He wants $10 for one. If I can find it again, how 'bout 
$12. Including USPS?

 MIKE KOVACS




________________________________
From: "movair at aol.com" <movair at aol.com>
To: virtualvairs at corvair.org
Sent: Tue, May 8, 2012 7:43:22 PM
Subject: <VV> WANTED: Engine Oil Slinger


Evening all,
  
       I'm in need of an oil slinger for a 65, 110 engine I'm currently 
rebuilding. This was not a complete engine when I got it some years ago. 
Partially disassembled, someone was trying to build it for a VW conversion. I 
found that the rods were mounted on the crank upside down, ( numbers on rods not 
showing.) , and notch on pistons facing the rear of the engine. Oh, and lets not 
forget the nicks on the rod journals from the connecting rod bolts.

       It's almost ready for finishing. At this point, it has an OT-20 cam and 
running .040 pistions and cylinders. A few NOS parts, including a 110 PG 
distributor, top cover baffle, and a folded fin oil cooler. Plans are to put it 
in my 62 Greenbrier, mated to its Powerglide. 


       If you can help with the oil slinger, contact me by email at 
MoVair at aol.com.

       Kelly Parker
      Corvair Atlanta
       62 Greenbrier
       65 Monza Coupe