<VV> Replacing Oil Pressure Regulator Spring

[Mike]

Before you change the spring change the switch . My neighbor had a light on on his 64 monza so i changed the switch and it fixed it. Start with the simple.
Sent from my Samsung smartphone on AT&T

Joel McGregor <joel at joelsplace.com> wrote:

>Hate to disagree but it could possibly be the spring.  I've had it happen with the exact symptoms he has.  Springs do settle especially after so many years and so many heat cycles.  Mine happened 20 years ago.  His light is coming on but how would the light being on or off tell you that it could or couldn't be the spring?
>
>-----Original Message-----
>From: virtualvairs-bounces at corvair.org [mailto:virtualvairs-bounces at corvair.org] On Behalf Of BobHelt at aol.com
>Sent: Friday, March 23, 2012 11:55 AM
>To: corvairdad at gmail.com; virtualvairs at corvair.org
>Subject: Re: <VV> Replacing Oil Pressure Regulator Spring
>
>Tom,
>It's not the oil pressure spring. Unless the oil light is coming on, It's OK. 
>If the light is on, install a high vol oil pump.
>Regards,
>Bob Helt
> 
> 
>In a message dated 3/23/2012 8:38:12 A.M. US Mountain Standard Time,  
>corvairdad at gmail.com writes:
>
>My  recently rebuilt 95HP engine is only registering 5 psi oil pressure
>at 500  rpm after a highway run. My first attempt at fixing this issue
>will be  replacing the regulator spring. Do I have to drain the oil to
>do this or is  the spring's level above the normal oil level?
>
>Thanks,
>
>--  
>Tom in Baltimore
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________