<VV> fan mount bolts...

[Mark Durham]

Cash, the torque range is 7-13 ft lbs, and I also support using the
special bolts, see page 10 and #16 of Clarks catalog, as an example.
Mark Durham

Sent from my Windows Phone
From: John Sweet
Sent: 6/21/2012 5:45
To: Cash Case; virtualvairs at corvair.org
Subject: Re: <VV> fan mount bolts...
Cash,
If your engine has the original GM bolts I suggest that you replace them
with the anti-shake bolts that the Corvair vendors sell.  Every engine I
buid I put the new bolts on them and no leaks.
John Sweet
----- Original Message -----
From: "Cash Case" <cash.case at sbcglobal.net>
To: <virtualvairs at corvair.org>
Sent: Thursday, June 21, 2012 6:51 AM
Subject: <VV> fan mount bolts...


>I noticed that my car kept leaking oil and I couldn't find where.  Then
> I heard an ominous chirp and thought... there goes the fan bearing.  I
> took everything apart down to the engine top.  The bolt that hold that
> piece on, I think about 12 or 16 of them, were all loose.  I have no
> idea how many years those have been loose.
> Turns out that the fan bearing feels fine, but the alternator shaft
> slides in and out about an eighth of an inch.  I think the alternator is
> my problem, but since I have a new engine top with a new bearing
> anyway... and I'm there already... it's going on.
>
> Can anyone tell me the torque specs for the engine top bolts?  I've got
> a book, but it's still packed in a box from the move... and I couldn't
> tell you where the box was if my life depended on it.
> -Thanks in advance-
> -Cash Case
> 1 always under repair '65 140.
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________