<VV> need diff

[Bob Bauer]

I had one done a couple of years back and it is holding up just fine.
Cost me 30 bucks for the job

Bob Bauer




________________________________
From: shortle <shortle556 at earthlink.net>
To: Harry Smith <harrysmith1957 at gmail.com>; Virtaul Vairs 
<virtualvairs at corvair.org>
Sent: Wed, January 18, 2012 8:40:40 PM
Subject: Re: <VV> need diff

Why not just have it welded Harry? There are plenty of other people that have 
broken diff. housings (myself included) and then have them welded. 

Timothy Shortle in Durango Colorado 81301


-----Original Message-----
>From: Harry Smith <harrysmith1957 at gmail.com>
>Sent: Jan 18, 2012 5:51 PM
>To: Virtaul Vairs <virtualvairs at corvair.org>
>Subject: <VV> need diff
>
>Well Guys, I did it again! You may remember about a year ago shortly after
>I got my Rampside while removing the engine I broke the differential snout.
>I got a replacement way back then and finally was getting around to
>replacing it. The diff came apart easily, the broken snout pressed right
>out with no problem and the new snout went right in. While pressing the
>race for the bearing back in it went a little crooked and as I added more
>pressure to try and straighten it out I snapped the whole side of the
>housing off, from the starter mounting hole all the way to the bottom. I am
>now in need of a replacement differential or housing, I can reuse my
>insides, I inspected it as I was taking it apart and everything looks good.
>I would appreciate one close to South Florida and cheap as I do not have a
>lot of money to spend on the truck right now and shipping would be high. I
>feel like an idiot, trying to fix my first mistake I have made another
>bigger mistake! I think I did not have the housing seated properly in the
>press.
>Harry Smith
>1963 Rampside
>Coral Springs, FL
>
>
>"THERE IS NO TRY,
>THERE IS ONLY DO
>OR DO NOT"
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the 
>property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________