<VV> FC Heater Hose question

[shortle]

Of course Terry just because the vehicle never came with such a part does not mean you cannot use it unless of course you are attempting a "total original stock restoration"(?). I am 1 that likes to improve my vehicles over what the factory did.(Sorry SCG).
Timothy Shortle in Durango Colorado 81301 


-----Original Message-----
>From: tkalp at cox.net
>Sent: Jan 17, 2012 11:45 AM
>To: VirtualVairs at corvair.org
>Subject: Re: <VV> FC Heater Hose question
>
>
>After fixing the in-op radio on my recently aquired Lakewood, I crawled under the Greenbrier once more moving the driver's heater hose in to the proper position I found that the sleeve came out right at the battery connection to the starter. Looking closely there were no spots on the sleeve or hose that indicated there was ever a support on it. My conclusion . . . I mixed a LM support in with the parts I removed from the Greenbrier and the Greenbrier never had one . . .
>
>Anyone need a nicely blasted and painted LM heater hose support?
>
>Appreciate all the help and feel a bit silly.
>
>T. Kalp
>Wichita, KS
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________