<VV> Valve adjusting sequence - apoplogy

[Ron]

There is no sequence from valve to valve other than doing the groups listed 
in the shop manual at the two appropiate positions of the crank, also as 
described in the shop manual.
RonH

----- Original Message ----- 
From: <aeroned at aol.com>
To: <virtualvairs at corvair.org>
Sent: Sunday, February 26, 2012 7:49 AM
Subject: Re: <VV> Valve adjusting sequence - apoplogy


>
> Andy,
>
> I can't remember the sequence either. The way I do it is one TDC adjust 
> all of the valves. Then rotate the crank 360 degrees and adjust the valves 
> that are loose.
>
> Ned
>
>
>
> -----Original Message-----
> From: Kinzelman, Andy <akinzelm at greatnortherncorp.com>
> To: virtualvairs <virtualvairs at corvair.org>
> Sent: Sun, Feb 26, 2012 7:13 am
> Subject: <VV> Valve adjusting sequence - apoplogy
>
>
> Guys,
> hope my earlier question will NOT start up the hot vs cold debate.  Cold 
> is
> ow I do my adjustments and that is the info I need.
> hanks,
> ndy K.
> _______________________________________________
> his message was sent by the VirtualVairs mailing list, all copyrights are 
> the
> roperty
> f the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> his list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> ost messages to: VirtualVairs at corvair.org
> hange your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>