<VV> Penetrating oil vs. ATF/Acetone

[Jim]

I have been using this for several years.  I works fantastic but the problem
you will run into is finding a dispenser that can stand up to the mixture.
It will eat rubber and plastic.  Be careful where you let it run also.

Jim V.

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of P.H. Raker
Sent: Monday, December 31, 2012 11:27 AM
To: virtualvairs at corvair.org
Subject: <VV> Penetrating oil vs. ATF/Acetone

A friend who is not a Corvair person sent this to me. It sounds
interesting.  Has anyone tried it?  What were your results?
 
Phil Raker
'65 Corsa Cpe - 140/4
'63 Greenbrier - 110/4
 
---






>From my motorhome forum:
 
Most of us have had difficulty at one time or another with loosening nuts or
bolts,screws etc..I have been fooling around with a 50% mixture of ATF and
Acetone with terrific results . It is a lot cheaper as well. 
The engineering tests on this are as listed: 
no oil....516 lbs
WD-40...238 lbs
PB blaster....214 lbs
Liquid wrench...127 lbs
Kano Kroil...106 lbs
ATF-Acetone mix...53 lbs
Lacquer thinner seems to work as well.
I don't know who did the testing but this stuff seems to work for me. I
would like others to test this out as I can't believe my results so far & I
have no more frozen bolts screws etc. Perhaps you could post to this forum
with your personal results  _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________