<VV> tire pressure

[hallgrenn at aol.com]

Bruce,

I've got passenger minivan tires on my Greenbrier and I keep all four at 35 p.s.i.  

Bob


-----Original Message-----
From: Vairtec Corporation <Vairtec at optonline.net>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Wed, Aug 22, 2012 3:33 pm
Subject: Re: <VV> tire pressure


Bruce, the 'right' tire pressure for your Rampside may not necessarily 
be the same as the tire pressure I use on my Rampside, but the 
oft-recommended 10-psi difference front-to-rear applies to Corvair cars, 
not the truck and vans.  I happen to use about 38 psi at all four 
corners, with 185/85-R14 radial light-truck tires on the stock wheels.

--Bob


On 8/22/2012 3:15 PM, Bruce Alexander wrote:
> Does anyone know what the reccommended tire pressure should be  for a 61
> Rampside with 205-75-R 14 , radial tires . There has been some talk here
> about radial tires needing more pressure than bias ply, still with a 10 #
> difference front to rear.
> Also is 75# a reasonable torque for alloy wheels?
>


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________