<VV> tire pressure

[Lon Anderson]

Bruce, 
The FCs used the same pressure all around, front & rear. If you're hauling stuff, I'd go higher than the typical 34 psi that I use on my Greenbrier... but I run between 34 & 38, just don't go over the tire's rating. I think the owner's manual says 28 psi...
Good luck!
Lonzo... more Greenbriers than thumbs....
;-)


-----Original Message-----
From: Bruce Alexander <brucea at wildblue.net>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Wed, Aug 22, 2012 3:15 pm
Subject: <VV> tire pressure


Does anyone know what the reccommended tire pressure should be  for a 61
Rampside with 205-75-R 14 , radial tires . There has been some talk here
about radial tires needing more pressure than bias ply, still with a 10 #
difference front to rear.
Also is 75# a reasonable torque for alloy wheels?

-- 
*...,Bruce*
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________