<VV> PG woes

[Harry Yarnell]

Before pulling the powertrain, pull the pan and see if the shift cable is
hooked to the belcrank.
I have seen a rare condition of a failed torque converter...


-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Michael Kovacs
Sent: Wednesday, April 18, 2012 11:11 AM
To: fastvair at yahoogroups.com; VV
Subject: <VV> PG woes

OK,
 I tried it and it didn't work. Put the used PG in the car and it does not
do anything. No LOW no DR no REV. I guess I'll have to pull the drivetrain
again and replace the bad one with one that I know works.

 Anybody have a suggestion of what can be wrong with the one that does not
work. 
YES, I did pull the pan and it was spotless and I did fill it with ATF.

 Only unusual thing is when I select Low, the dashboard selector doesn't
feel like it goes all the way to the bottom.

 MIKE KOVACS
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________