<VV> [FC] FC PANEL REMOVAL

[rod murray]

Thx steve...got 3 of the back 4 bolts out, and the pass side panel
out...last bolt is spinning With fingers but won't come out...Weird. Spent
3 hours trying to pull it down w vice grips, tap it down w hammer (yes I
managed to get one in behind the panel, but little room to pound), fire to
break it off...can't get a blade or sawmill up in there to cut it... other
suggestions?

On Sunday, April 8, 2012, Steven R. Spilatro <spilatrs at marietta.edu> wrote:
> Rod,
> I've had to remove those panels recently. The two larger bolts are
difficult to access, particularly the ones on the right side. In my
experience there were no other tricks than a rachet with a pivoting head
and a lot of spinal twisting.  But I also discovered that the panels will
not come out if those bolts are not removed :)
> Steve
>
> Marietta, OH
>
>

-- 
Rod
*"Reloaded in da 'burgh"*
412-719-3449