<VV> Toe adjustment sleeves stuck

[Harry Smith]

 Back in the day when I was aligning rear drive vehicles in Conn on a daily
basis I developed a few tricks.
First try, remove clamps off sleeves by removing bolts and pry open slightly
then knock off with hammer, spray inside slot with penetrating oil, let sit
a little, hit with hammer and try to turn.
Second try, leave clamps off, use adjusting hook and bend ends of sleeves
slighly away from threads, again soak with penetrating oil and hit with
hammer, try to turn.
Last try, use heat wrench.
Harry Smith
1963 Rampside
Coral Springs, FL

"THERE IS NO TRY,
THERE IS ONLY DO
OR DO NOT"