<VV> 66 accelerator linkage
Matt Nall
patiomatt at aol.com
Mon Oct 17 10:39:49 EDT 2011
Need some help here, throttle response slow to speed up, peddle has to be moved
about 1/4 before
rpm's come up,
I first thought that the piviot under the rear seat was rusted out , but that
was not the problem,
also you cannot operate the linkage from the engine compartment, the throttle
rod will not pull up
to open the carbs....
I looked at the linkage on the transmission and found that it did not appear to
be correct, rod
linkage and piviot are in line, no way it can be correct, photo attached........
O. B. Stewart
Music City Corvair Club
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bill's convert.JPG
Type: image/jpeg
Size: 1043524 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20111016/deef7b93/attachment.jpe
==========================================================================================
Time to replace the plastic bushings... and re-adjust.
Right now.. the swivel on the "throttle rod" needs to be "shortened"
to get the bellcrank over center.
Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Patio
http://tinyurl.com/Matts-Tech-Pages
More information about the VirtualVairs
mailing list