<VV> LM Wheel Bearings

[John Kepler]

Genius is defined by me as below:
>
Tie Rod Ends and Ball Joints (Not the OEM ones), when 
> you grease them, the new grease pushes out the old grease, and you can 
> wipe it away.  

The problem with this little scenario is that when "the new grease pushes
out the old grease", it also destroys the seal integrity of the joint!
That's why the OEM joint doesn't have a Zerk fitting.  Over-lubing is every
bit as bad as under-lubing.
____________