<VV> Van gas heater

[Dave Leonard]

Hi Pete,

The fuel feed is a line from the fuel pump to the front where a regulator is
installed (down near the tank on the cars I believe).  The
pressure-regulated feed goes to the heater, and the overflow goes back to a
tank return line like the turbo return.  The regulator is a simple brass "T"
with a spring-loaded regulator on one side.  You'll need that for sure, the
rest you can rig-up.  Don't know if there are any other FC-specific bits.

Dave

> Date: Wed, 4 May 2011 06:14:47 -0700 (PDT)
> From: PETER INMAN <monza1965 at yahoo.com>
> Subject: <VV> Van gas heater
>
> I have purchased a gas heater in a 62 van to put in my Rampside. It looks 
> complete as if nothing has been touched. I`ve never worked with the gas
heaters 
> and need any advice available to aid me in the removal from the van. I
guess I`m 
> asking for parts ect. that arent obvious that I might miss or overlook.
One 
> thing right off the get go is the fuel supply to the heater, anything
special 
> there? (things likely missed)?Thanks for any help. I will be getting this
heater 
> Sat if the weather holds out.
>
> Pete Inman