<VV> [FC] Question About Nos Pleasurizer Shocks!

[James Davis]

Tenneco shock number is 34925 (Monroe) or 67925 (NAPA) that fits the 
same application and is in their low pressure mono-tube line of HD shocks.
Jim Davis

On 1/30/2011 1:10 PM, Dale Dewald wrote:
> At 06:25 1/30/2011 -0800, eddie iglar wrote:
>> Installing Shocks on my rampside! Is Gm Pleasurizer shocks on front and
>> back better then going to local auto parts store and buying updated shocks
>> like KYB or Gabriel from clarks! Need Input thks
> This depends upon what you like.  I did not like the excessive rebound
> effect of the stock FC front suspension so I installed a set of custom
> front springs from Ken Hand.   However, I like a controlled ride and
> positive feedback from the road surface (rather than a classic Cadillac
> ride) so I also installed Bilstein #B46-0925 shocks front and rear.  To me,
> this is an almost perfect setup.
>
> The Bilstein B46-0925 application is for Dodge D100-150-250 trucks and
> B100-150-200 vans.  Some minor modifications to the shocks and rear A-arm
> are needed to make them fit.
>
> If you decide to install Ken Hand's springs, you may want to consider also
> installing an ADDCO front anti-roll bar to make up for lost roll stiffness
> due to the lower spring rate.
>
> Dale Dewald
> Hancock, MI